Booster Lights
| Light | What it means |
|---|---|
| Amber = Charging |
If the Booster is plugged in to USB, the blinking amber light indicates the onboard battery is charging and/or the Predictive Thermometer is charging. In portable charger mode, press the button (light). An amber light response indicates the thermometer is still charging. The indicator will turn off after 5 seconds. |
| Green = Charged! |
When plugged in, that means the Booster is charged and the Predictive Thermometer (if it's in there) is also fully charged. In portable charger mode, press the button (light). A green light response indicates the thermometer is fully charged. The indicator will turn off after 5 seconds. |
| Blinking White x3 = Searching |
A repeated pattern of 3 white blinks indicates that the Booster is searching for linked tools within range. It will only connect to Combustion tools that have been linked already. Follow the linking steps above. |
| Single White Blink = Connected/Repeating |
When the Booster is connected to a Predictive Thermometer (either directly or via another Booster/Display), it will repeat and rebroadcast the signal. A single white blink indicates this connection is live! The blink will repeat every 5 seconds. |
| Quick Red Blink = Low Battery | When the onboard battery is low, the Booster will repeat a very quick red blink. Time to recharge it! |
| Overlapping Patterns? |
It's possible that more than one light pattern will be triggered at a time. For instance, a Booster which is recharging itself (blinking amber) may also be repeating (single white blink). If you see a confusing light pattern, it's most likely two simple patterns that are overlapping. |